Contact Us

(+9821) 88-71-7011

 

Opening Times

Sat - Thu 10.00 - 19.00

Non Permanent Floor Protection - A Product Guide

Non Permanent Floor Protection - A Product Guide

Your floors need special protection when undergoing remodeling, during new development, moving heavy furniture or equipment, and for other occasions past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value 1000's of dollars in replacement and repair costs. This article describes surface protection products for floors so as to make informed decisions on the perfect product to use to your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embrace frequent adhesive films, rolled paper products and rolled textile protection. Protective supplies bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These embody corrugated plastic, masonite, and different rigid protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and normally come as four toes by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often leave adhesive residue when removed. Widespread paper protection products embody:

· Ramboard™ A coated compressed paper board 38 mils thick that's breathable, water resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is cheap but doesn't afford any impact protection and may simply tear

· Scrim paper could incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to bolster the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nonetheless they're additionally too thin to supply much impact protection.

· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The large drawback of using Rosin paper is that it could cause a everlasting stain if the paper gets wet. Rosin paper can also rip simply so it not normally recommended to be used

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nonetheless it isn't coated with a water resistant end and ought to be kept dry at all times so that it doesn't disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping in order that they shouldn't be used on any floors that are curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not offer any impact protection and are usually rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and don't use recycled materials making them a poor selection in maintainable protection. Protection films are available in a wide range of adhesion "tack". Hard surface protection films could have a decrease tack and color than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the standard dimension of 4 ft by 8 ft and are more costly per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/four inch to three/4 inch thick. Both products provide impact protection on a wide range of floor types and provide adequate protection towards heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nonetheless they're bulky to carry and store. These wood sheets ought to be used on high of a softer protection reminiscent of a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don't supply moisture protection and could be harder to cut to measurement than different protection types.

If you adored this article and you would such as to receive even more facts pertaining to temporary carpet protection kindly go to our own website.