Contact Us

(+9821) 88-71-7011

 

Opening Times

Sat - Thu 10.00 - 19.00

×

Warning

JUser: :_load: Unable to load user with ID: 10511

up and down led panel light

There are some weakness of LED lighting waiting for enchancment. One in every of them is that the lighting is a bit of bit too sharp for human eyes. Stare on the clean 300x300 led panel light gentle supply for seconds and eyes won't be very snug.


Not that friendly as incandescent lights. So many lamps are utilizing a frosted glass to various these light, and check out to provide a better feeling. These lamps are getting higher. One of these lamps are LED panel lights, which come from the thought of Grid mild. Of course there are also LED grid lights available in the market, which consist of 3pcs of tube lights in a grid base. Not bad, but from the frosted lamps thought, designers start to make a complete panel light, instead of some pcs of tube lights.


So how can we make an ideal such mild? We use SMD led as the light source, which usually be SMD5050 and SMD3528 Led. SMD5050 and SMD3528 are additionally the primary gentle source of LED strip lights.


Comparable with LED strip mild, 300x300 led panel light panel lights use a whole lot of SMD3528 or SMD5050 to complete one Ceiling panel light manufacturer (www.lvt-lighting.com) unit. There are two important kinds of LED panel lights in the market. One is energy provide inside, the opposite is power supply outside the panel. The former one must be relatively more thick, some might be 8cm, with the SMD pcs on the bottom of the panel. The latter could be only 3CM, with the SMD on the aspect of the


panel. Which one's better? Not certain. The thick one can be higher theoretically, but it also depends upon the manufacturing and the materials.